Download Brochure

Get In Touch

We value your queries and promise swift responses. Reach out to us effortlessly via email or give us a ring at the phone numbers mentioned below for immediate assistance.

Aqua Guard PVC Waterstops

  • Aqua-Guard PVC Waterstop are manufactured from highest grade Poly Vinyl Chloride (PVC) compound by employing state-of-the art machinery designed to extrude PVC Waterstops.

  • Application

    Specially designed Aqua-Guard Waterstop seal the construction and expansion joints when embedded in the reinforced concrete across and along the joint to form a continuous water-tight diaphragm that prevents the passage of fluid and moisture through the joint.

  • Product Installation

    INSTALLATION INSTRUCTION:

    Prior to concreting, make sure that waterstop is installed in its correct position securely in the concrete structure.
    Concrete must be fully compacted around the waterstop to ensure that no voids or porous areas remain.

    Internal Application

    Aqua-Guard Internally placed Water stops are manufactured with a series of eyelets at a distance of 30 cm along both edges for wiring to nearby reinforcement.
    These eyelets should always be used. There should be adequate clearance between waterstop and surrounding reinforcement for wiring and to ensure good compaction.

    External Application

    Aqua-Guard externally placed Water stops have a reinforced edge nailing flange to give a tear resistant and secure fixing.

    Horizontal Installation: When external Waterstop profiles are placed horizontally and supported on blinding or protected waterproofing the profiles do not normally require any fixing.

    Vertical Installation: While fixing external Water stops profiles to vertical shuttering use double headed nails fixed through the
    reinforced nailing flange into the shuttering /timber formwork. The end of the nail can be cut-off after the concrete is cured to allow following trades to continue such
    as waterproofing of coating operations.

  • Internal Application

    Standard thickness : 4mm
    Special profile thickness : 10mm

    Aqua Guard PVC Waterstop (Internal Construction Joint)
    ICJ
    Product Code Width
    ICJ 150mm
    200mm
    250mm
    300mm
    320mm
    Aqua Guard PVC Waterstop (Internal Expansion Joint)
    IEJ
    Product Code Width
    IEJ 150mm
    200mm
    250mm
    300mm
    320mm
  • External Application

    Standard thickness : 4mm
    Special profile thickness : 10mm

    Aqua Guard PVC Waterstop (External Construction Joint)
    Product Code Width
    ECJ 150mm
    200mm
    250mm
    300mm
    320mm
    Aqua Guard PVC Waterstop (External Expansion Joint)
    EEJ
    Product Code Width
    EEJ 150mm
    200mm
    250mm
    300mm
    320mm
  • Horizontal / Flat Joints

    • Flat 2 - Way
      Flat 2 - Way
    • Flat 3 - Way
      Flat 3 - Way
    • Flat 4 - Way
      Flat 4 - Way
  • Vertical Joints

    • Vertical 2 - Way
      Vertical 2 - Way
    • Vertical 3 - Way
      Vertical 3 - Way
    • Vertical 4 - Way
  • Welding Knife & Jointing Jig

    • Welding Knife
      Welding Knife
    • Jointing Jig
      Jointing Jig
Download Brochure

Get In Touch

We value your queries and promise swift responses. Reach out to us effortlessly via email or give us a ring at the phone numbers mentioned below for immediate assistance.